D-Link DGS-1250-28X Gigabit Smart Managed Switch with 10G Uplinks
The D-Link DGS-1250 Series Gigabit Smart Managed Switches with 10G Uplinks are the latest generation of switches to provide increased Power over Ethernet (PoE) output, high port density, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1250 Series provides a cost-efficient and flexible solution for expanding any business network.
10G High-Bandwidth Connectivity
All models in the DGS-1250 Series feature four 10G SFP+ ports, allowing you to choose the most suitable media type for your requirement, to mitigate network bottlenecks.
Power and Connectivity
All DGS-1250 Series PoE switches include support for IEEE 802.3af/at with a high PoE power budget of up to 370W. This allows more PoE devices to be powered by a single switch and for devices to be installed in remote locations without immediate access to power outlets.
The DGS-1250 Series also supports advanced features such as static routing, routing, allowing you to segment your network into workgroups that communicate between VLANs. With this, you can reduce the load on your core devices, allowing you to create a scalable and efficient network.
Advanced Access Control
D-Link’s innovative Safeguard Engine helps to protect the switches against traffic flooding caused by malicious attacks. A host of security and authentication features such as 802.1X port-based authentication, Access Control List (ACL), Address Resolution Protocol (ARP) spoofing prevention and IP-MAC-Port Binding, helps to further protect your network.
Advanced QoS and Surveillance Mode
The DGS-1250 Series supports Auto Voice VLAN and Surveillance Mode, which allows voice and video traffic to be automatically identified and prioritised. Surveillance Mode provide a Web UI specifically designed for video surveillance, making related features easily accessible and simplifying management of your surveillance network.
The DGS-1250 Series can be managed through the Web UI, the D-Link Network Assistant (DNA) utility or via the dedicated console port. The D-Link Network Assistant utility furthermore allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and for simultaneous configuration and maintenance. The full Command Line Interface (CLI)1 support provides network engineers more control, precision, and repeatability on network configuration.
D-Link DGS-1250-28X Specifications
- 24 x 10/100/1000BASE-T
- 4 x 10G SFP+ ports
- RJ-45 port for CLI management
- IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
- IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
- IEEE 802.3az Energy-Efficient Ethernet (EEE)
- IEEE 802.3x Flow Control
- IEEE 802.3ae 10 Gigabit Ethernet
- IEEE 802.3af/at (PoE models only)
- UTP Cat. 5, Cat. 5e (100 m max.)
- Full/Half-duplex for 10/100 Mbps
- Full-duplex for 1000 Mbps
Media Interface Exchange:
- Auto MDI/MDIX adjustment for all twisted-pair ports
MAC Address Table:
Static MAC Addresses:
Maximum 64 Byte Packet Forwarding Rate:
Packet Buffer Memory:
Maximum Power Consumption:
Standby Power Consumption:
Level 3 Lite - Smart Switch - 24 x 10/100/1000 + 4 x 10 Gigabit SFP+ - rack-mountable